Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
DuraFlex Chimney Cleaning in Fort Worth, TX | Hadley Chimney Fort Worth
DuraFlex chimney cleaning in Fort Worth means more than brushing out creosote. It means checking how the liner is holding up against the blackland prairie clay under your slab, which is the real reason liners in this town fail early. We’re an independent DuraFlex service provider covering the whole Fort Worth area, and we bring a camera into every flue because if we can’t show you the problem, we haven’t done our job. Call (682) 900-6393 to book a cleaning or inspection.
Why Fort Worth Residents Choose Us for DuraFlex Service
We’ve serviced DuraFlex chimney liners across Fort Worth’s housing stock as Duraflex specialists for over a decade. That’s long enough to know the difference between a liner that’s dirty and a liner that’s ovalled because the chimney stack shifted half an inch with the clay soil. Our crews work on DuraFlex SS 316L, Pro 316Ti, and aluminum liners in everything from 1960s brick-veneer boxes in Wedgwood to newer builds pushing out toward Saginaw. Cory Mitchell, our owner, came up through the trade with hands-on firebox and flue work across the country before putting down roots here, and he’s particular about one thing: no liner cleaning happens without a camera check of the connection at the throat. That’s the spot Fort Worth foundations stress first. We stock genuine DuraFlex top plates, rain caps, and liner sections locally, so when your cleaning turns into a repair, we’re not waiting on a freight truck from Ohio. And every job, cleaning or repair, comes with a written price before we start and the 365-Day Done Right Promise on any repair work. You’ll see before-and-after photos from inside the flue, not a vague invoice.
Styles & brands we work with
Common DuraFlex Chimney Cleaning Problems We Solve in Fort Worth
- Hardened creosote inside SS 316L corrugations. Fort Worth’s hot, humid summers bake the creosote from last winter’s fires into a hard glaze that laughs at a standard brush. We use a rotary whip with plastic or steel heads depending on the liner thickness, and we’ll check for volume before we start because a glazed liner cleans differently than a fluffy one.
- Liner ovalization from the ‘Fort Worth lean.’ The outer brick wythe pulls away from the clay tile flue as the expansive soil heaves. That shift squeezes the flexible DuraFlex liner and kinks it near the offset. You’ll notice backdrafting on windy days or smoke curling into the room when you light the fire. We check the liner’s roundness with a camera before and after cleaning.
- Corrosion pitting at the bottom connector. Acidic flue gases condense in the summer humidity and pool at the liner’s base where it meets the appliance. We see this most often on liners venting older gas furnaces or water heaters. Pitting here doesn’t always mean replacement, but we document it with photos and measure the depth. Once it passes 30% of the pipe wall, a patch is a waste of your money.
- Failed top plate sealant and water intrusion. Fort Worth gets serious thunderstorms with hail, and a top plate that’s lost its seal lets water ride the flue down into the firebox. You’ll see efflorescence on the brick outside, or damp spots on the wall inside. We replace the sealant with a product that actually flexes with the liner’s thermal expansion, then test it before we come down.
- Debris and nest blockages in unused chimneys. Long summers with the damper open mean birds and squirrels find their way in. We’ve pulled nests out of DuraFlex liners in older Fort Worth neighborhoods more times than we can count. A blocked flue pushes carbon monoxide back into the house, so if you haven’t used the fireplace since spring, let us camera the flue before you light the first fire.
DuraFlex Service in Fort Worth: What Local Conditions Mean for Your Equipment
Here’s the thing about Fort Worth that doesn’t get talked about enough in chimney service. The blackland prairie clay under most of this city expands and contracts with drought and rain cycles, and it moves foundations. Not dramatically, not enough to scare you, but enough to shift a chimney stack by up to half an inch per decade. That half inch at the footer translates to misalignment at the fireplace throat. So you can have a DuraFlex liner that looked perfectly round when it was installed, and ten years later it’s ovalled at the connection because the clay tile flue behind it moved while the exterior brick stayed put. Wedgwood and Western Hills are the textbook examples. We see homes out there with the classic outer brick wythe pulled a quarter inch off the flue tile, and the homeowner has no idea because from the outside, the chimney looks fine. That’s why our Chimney Sweep - Fort Worth routine always includes a Level 2 camera check of the liner connection. Not just a visual smoke chamber sweep. When we clean a DuraFlex liner in Fort Worth, we’re looking at structural movement as much as creosote, because that movement is what turns a routine cleaning into a liner rescue or replacement. It’s also why we recommend a camera inspection any time you buy a house here that has a masonry fireplace, even if the seller says the chimney was “just serviced.” The previous owner’s sweep might not have looked at what Fort Worth soil does to liner connections.
DuraFlex Models & Products We Service in Fort Worth
We work on the full DuraFlex lineup common in Fort Worth homes. The SS 316L flexible chimney liner handles the majority of wood-burning fireplaces we see, from older brick chimneys in Ridglea to 2000s builds in north Fort Worth. The Pro 316Ti is the titanium-stabilized version for higher-temperature applications; we carry both profiles so when a liner section needs our Chimney Repair in Fort Worth, we match the corrugation exactly. For gas appliances, the DuraFlex aluminum liner is standard in homes that converted from wood, and we service those too. The rain caps and top plate kits we install are genuine DuraFlex. We don’t swap in generic caps because the fitment and flue gas flow rating matter, and a mismatched cap changes draft performance. For non-structural repairs like mortar repointing or flashing, we use aftermarket materials that meet or exceed local code. For liner work, we stay with OEM because a third-party liner section rarely matches the UL listing of the original system. We stock the fast-moving DuraFlex parts in Fort Worth: liner sections, top plates, rain caps, and connector kits. That keeps turnaround tight when a cleaning uncovers a problem.
See the difference
Before
After
Before
After
Before
AfterDuraFlex Service Pricing in Fort Worth
A standard DuraFlex chimney cleaning in Fort Worth runs $189 to $279 depending on the flue height, liner condition, and how much glazed creosote we’re dealing with. A Level 2 camera inspection, which we include with any cleaning where we see structural concerns, runs $199 to $249 on its own. If the cleaning uncovers liner damage, a top plate replacement typically runs $185 to $320 with parts and labor, and a full liner replacement runs $2,500 to $5,200 depending on length, profile, and access. Those are the numbers we quote before we lift a brush. For an exact quote on your specific DuraFlex liner, call (682) 900-6393 and we’ll come out, camera the flue, and show you exactly what you’re looking at. The written estimate is free.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – DuraFlex Chimney Cleaning in Fort Worth
It’s real, and it’s measurable. Expansive blackland prairie clay under Fort Worth’s slab foundations moves with moisture cycles, and chimney stacks shift with it. Half an inch of movement per decade isn’t dramatic until it’s concentrated at the throat connection where the liner meets the firebox. We’ve documented ovalled and kinked liners in Wedgwood, Western Hills, and other neighborhoods on the clay belt. The fix is often straightforward if caught during a cleaning; if left alone until the liner tears, you’re looking at replacement instead of re-rounding. We’ll camera your flue and show you the photos. Call (682) 900-6393 if you haven’t had a Level 2 inspection since moving in.
Standard wire brushes work for light fluffy creosote, but Fort Worth’s summer heat turns creosote glazed and hard by October, and that needs a rotary whip with the right head for the liner profile. We match the whip to the liner’s corrugation so we’re not scouring the stainless. For the SS 316L and Pro 316Ti liners, we use plastic or steel heads sized to the inside diameter and we always follow the cleaning with a camera pass to verify the walls are clean and the seam welds weren’t disturbed. If your liner has never been inspected since installation, call (682) 900-6393 and we’ll schedule a sweep plus a camera check.
For a fireplace that’s used regularly through the fall and winter, we recommend an annual inspection and cleaning. For a fireplace that’s used occasionally or not at all, every two years is the minimum, and that’s not just about creosote. Fort Worth’s freeze-thaw cycles stress mortar and the top plate seal. We want to catch sealant failure before a spring storm drops water down the flue and onto the firebox. The camera inspection is the important part, not just the brushing. Call (682) 900-6393 to get on the fall schedule before the rush.
Not always. Pitting alone doesn’t condemn a liner, and the 30% rule is what we use: when corrosion or distortion exceeds 30% of the pipe wall at a given location, patching isn’t worth your money. If the pitting is shallow and isolated at the bottom connector, we can often replace the connector section and keep the rest of the liner. The deciding factor is whether the pitted area is structurally compromised or just cosmetically rough. We measure and document it with photos before recommending anything. For a straight answer on whether your liner needs repair or replacement, call (682) 900-6393 and we’ll camera the full run.
Yes, and that’s exactly the application DuraFlex liners were designed for. Homes in Arlington Heights and Ridglea from the pre-1940s often have brick chimneys with no clay tile liner at all, which is a fire and carbon monoxide risk if left open. A properly sized DuraFlex SS 316L liner drops into the existing chimney, creates a continuous flue path, and meets the UL listing for wood-burning venting. The key is proper sizing and a good top plate seal, because those old brick stacks are rough and many have settled. We clean and inspect those liners regularly across the older Fort Worth neighborhoods, and we know how to work around the quirks of century-old brick. Call (682) 900-6393 to see if your chimney is a good candidate for a DuraFlex liner.
Service Areas Near Fort Worth
We provide DuraFlex chimney cleaning throughout the Fort Worth metro and the surrounding cities. If you’re in Keller, Mansfield, Saginaw, Benbrook, or Colleyville, we’ll bring the same camera inspection, written pricing, and DuraFlex expertise to your chimney. Fort Worth is home base, but our service area covers the full western and northern Tarrant County belts.
Book Your DuraFlex Service in Fort Worth Today
Before you light the first fire this fall, make sure your DuraFlex liner is clean, round, and sealed. We’ll camera the flue, show you what we find, and give you a written price before any work begins. Call (682) 900-6393 now to schedule your DuraFlex cleaning or Level 2 inspection. A live person answers 24/7, and we’ll get you on the book for a time that works.
Written by Cory Mitchell, Owner at Hadley Chimney Fort Worth, serving Fort Worth since 2003.