Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Benbrook, TX
Chimney work in Benbrook usually comes down to one thing: the age of the house. Most homes here were built between the 1960s and 1980s, and that means original clay flue liners, brick veneer, and masonry fireplaces that have spent decades baking under Texas sun and freezing through winter cold snaps. Hidden spalling, cracked crowns, and creosote (the flammable tar buildup that makes chimneys a fire risk) are the calls we get most. If you need a chimney company in Benbrook, TX, call (682) 900-6393 and we’ll give you a written price before anyone picks up a brush.
Why Benbrook Homes Are Different
Benbrook’s housing stock tells a story. The city grew as a Fort Worth suburb in the mid-century decades, and the brick-veneer ranches and split-levels from that era still dominate Timber Creek, Westpark, and the neighborhoods off Chapin Road. Those homes almost always have masonry fireplaces with original clay flue liners. Clay liners crack. The North Texas freeze-thaw cycle does it slowly, and the intense summer heat widens those cracks. Water gets in, mortar erodes, and sections of flue liner start flaking away, a process called spalling. You won’t see it from the living room. A camera inspection will.
Newer construction near Benbrook Lake is different. Those homes tend to have factory-built chimneys, which use a completely different inspection protocol and parts list. What’s routine for a 1970s ranch off Park Center Boulevard is wrong for a 2015 build near the lake. That’s why we don’t treat Benbrook as one generic service zone.
Styles & brands we work with





Our Main Benbrook Services
Benbrook homeowners call us most often for two things: a chimney that hasn’t been swept in years, or a chimney that’s showing signs of water damage. Below is how each job works here, plus gas fireplace repair, which picks up every fall when the first cold front hits.
Chimney Sweep in Benbrook
A sweep in Benbrook is more than brushing soot. We run a camera up the flue to check the clay liner, and we look at the crown, the flashing, and the firebox, the brick chamber where the fire actually burns. In Timber Creek, we regularly find creosote buildup from fireplaces that get heavy use during short North Texas cold snaps and then sit idle. That creosote is what ignites in a chimney fire. Read more about Chimney Sweep in Benbrook.

Chimney Repair in Benbrook
Repair calls in Benbrook usually start with water. Cracked crowns from direct sun exposure let rainwater seep into the masonry, and by the time a homeowner notices a stain on the ceiling, the damage is already underway. We repair crowns, replace damaged flue tiles, and rebuild fireboxes using materials like HeatShield ceramic repair compound and Copperfield accessories. See what a repair involves on our Chimney Repair in Benbrook page.

Gas Fireplace Repair in Benbrook
Gas fireplaces in Benbrook homes range from 1990s inserts to newer direct-vent units, and the most common fall calls are pilot lights that won’t stay lit and thermocouples that have failed after sitting dormant through a Texas summer. We service the gas logs, burner assemblies, and venting, and we check for carbon monoxide before we leave. Details are on our Gas Fireplace Repair in Benbrook page.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Benbrook
We work with a focused set of trade brands on Benbrook jobs: DuraFlex flexible liner systems, HeatShield ceramic repair compound, and Copperfield chimney accessories. We stock common Copperfield parts on the truck and can typically have DuraFlex or HeatShield materials to a Benbrook job within one or two business days. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Benbrook, TX
| Service | Typical range in Benbrook |
|---|---|
| Chimney sweep (standard) | $180 – $340 |
| Chimney sweep + camera inspection | $250 – $425 |
| Chimney cap supply & install | $220 – $580 |
| Flue liner resurfacing (smoke chamber) | $1,200 – $2,800 |
| Stainless steel flue liner replacement | $2,200 – $5,800 |
| Chimney crown repair (minor cracks) | $300 – $900 |
| Chimney crown rebuild | $1,000 – $2,600 |
| Tuckpointing (masonry joint repair) | $800 – $2,400 |
| Firebox repair / rebuild | $900 – $3,500 |
| Gas fireplace diagnostics | $120 – $300 |
| Gas logs replacement | $450 – $1,100 |
| Chimney flashing repair | $350 – $900 |
What pushes a Benbrook quote higher is usually water damage that’s been ignored. A cracked crown on a split-level in Westpark that sits in direct west sun is far more common than a homeowner expects, and the repair grows in cost the longer water has been working through the mortar. Here’s our upfront-price promise: you get a written price before any work starts, every single time. No surprise charges at the door.
Neighborhoods We Serve in Benbrook
We run jobs across Benbrook on a regular rotation, including the older mid-century pockets and newer lake-adjacent builders. Response time across the city is typically within a few business days, with faster availability during the late summer and early fall before burning season kicks in.
- Timber Creek
- Westpark
- Park Center
- Clear Lake Park / Benbrook Lake area
- Pecan Valley
Service Area – Cities Near Benbrook
Our technicians also run calls through Fort Worth, TX, Keller, TX, Mansfield, TX, and Saginaw, TX. Scheduling and dispatch are coordinated from our Dallas-Fort Worth office, and our crews serve Benbrook locally.
Serving Benbrook, TX - Our Local Coverage Area
We’re based in the Benbrook area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Benbrook
Most Benbrook jobs are scheduled within a few business days. The busiest window is October through December, when Texans fire up their fireplaces for the first cold snap, so late summer and September are the fastest times to book. Call (682) 900-6393 to get on the schedule for an exact date.
Most routine chimney sweeping, cap replacement, and minor crown repair do not require a permit in Benbrook. Larger structural work, like a full flue liner replacement or a firebox rebuild, may need sign-off depending on the scope. We can advise on what applies to your specific property when we see it.
Yes, we service the entire city, including homes near Benbrook Lake and the newer subdivisions off Highway 377. Newer construction often uses factory-built chimneys, which need a different inspection approach than the older masonry fireplaces closer to downtown Benbrook.
Call (682) 900-6393 for a free estimate. A live person answers, 24/7. You’ll get a written price before work begins, before-and-after photos of the job, and a 365-Day Done Right Promise on every repair.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Benbrook Customers Say
"Drop cloths down, no soot anywhere. Booking was the easiest part."
- Susan B."Nice job on the gas fireplace. I had to reschedule once, but rebooking took seconds."
- Alice N."Fast, clean, and polite. Sweep took about an hour and the fireplace pulls well again."
- Helen Q.