Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Keller, TX
Chimney work in Keller, TX isn’t a generic service call. Most homes here were built between the 1990s and 2010s with prefabricated fireplaces and metal flues that homeowners rarely think about until something fails. Keller’s temperature swings, freezing rain, and summer humidity put real stress on those systems, and by the time a damper rusts through or a flue liner corrodes, you’re looking at a repair, not just a sweep. Hadley Chimney Fort Worth handles all three Keller chimney services, with upfront written pricing and photo documentation before work starts. Call (682) 900-6393 to book.
Why Keller Homes Are Different
Keller’s growth from a small town into a 45,000-person DFW suburb happened fast, mostly in the 1990s through 2010s. That means the housing stock is dominated by newer brick and stone veneer homes with factory-built fireplaces and metal chimneys, not the heavy masonry stacks you find in older Fort Worth neighborhoods. Those prefab systems were designed to last roughly 20 to 30 years, and many of them are now at or past that mark. The original dampers are often rusted in place from disuse and North Texas humidity, and homeowners frequently tell us they’ve never once had their chimney looked at.
Keller’s climate pushes the issue further. Hot, humid summers followed by winter temperature swings cause metal chimney components to expand and contract constantly. That movement warps dampers, loosens caps, and creates gaps where moisture leaks in. Humidity also accelerates creosote’s corrosive effect on metal flues, so a fireplace that looks fine from the living room can be hiding flaky, acidic deposits up top. In subdivisions like Hidden Lakes and Marshall Ridge, we routinely find original builder-installed prefab units that have never been inspected. The flue can rust through within two decades, and the homeowner has no idea until water stains appear on the ceiling.
Our crews know these Keller neighborhoods well enough to know what to expect before the ladder even goes up, which means a faster diagnosis and a clear explanation of what actually needs attention versus what can wait.
Styles & brands we work with
Our Main Keller Services
These are the three services Keller homeowners call us about most, each with its own dedicated page and a full breakdown of what the job involves locally.
Chimney Sweep in Keller
A Keller chimney sweep goes beyond brushing out soot. On prefab systems, we check for warped dampers, rusted caps, and moisture intrusion that’s common after ice storms. We remove creosote, that’s the flammable tar buildup that makes chimneys a fire risk, then document everything with photos so you see exactly what we saw. In Keller’s humidity, creosote can sit sticky and acidic against the metal flue longer than it would in a dry climate, which speeds corrosion. Most sweeps take 45 to 90 minutes. Chimney Sweep in Keller has a full walkthrough, pricing, and what you can expect.
Chimney Repair in Keller
Repair work in Keller leans toward prefab chimney issues: rusted dampers, cracked or spalled flue tiles in older masonry sections, and chimney caps that were torn loose by North Texas wind. We work with brands like DuraFlex and HeatShield for liner repairs, and Gelco caps and chase covers. Every job gets a written price before work begins and a 365-day written guarantee, along with a free second visit if any repair fails. If you’re in an older Keller section with masonry, we also handle tuckpointing, crown repair, and flashing. Chimney Repair in Keller covers our process with photos of what each failure actually looks like.
Gas Fireplace Repair in Keller
Gas log sets and direct-vent gas fireplaces are everywhere in Keller’s 1990s-and-newer subdivisions, and they don’t get the same kind of attention wood-burning units do. We service thermocouples, pilot assemblies, valves, and log sets, and we check venting for blockages that can cause carbon monoxide to back up into the room. That’s a real safety concern with gas units, not a hypothetical. If your fireplace lights unevenly or smells musty, call before you use it. We also confirm clearance to combustibles and test the unit under load. Gas Fireplace Repair in Keller has the full diagnosis list and pricing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Keller
We service and install the brands chimney pros actually rely on, including Copperfield chimney caps and accessories, DuraFlex flexible liner systems, and HeatShield repair compound for restoring damaged flues. Having these on hand means less waiting on parts for most Keller jobs. For a broader look at what we carry, see our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Keller, TX
| Service | Typical range in Keller |
|---|---|
| Standard chimney sweep (wood-burning, accessible roof) | $139 – $229 |
| Chimney sweep with prefab/metal flue | $159 – $259 |
| Level 1 chimney inspection | $99 – $179 |
| Level 2 chimney inspection (real estate or suspected damage) | $199 – $349 |
| Chimney cap installation (standard cap) | $150 – $350 |
| Damper replacement (prefab units) | $180 – $400 |
| Chase cover replacement (rust-through prevention) | $350 – $750 |
| Stainless steel liner installation | $1,800 – $3,500 |
| HeatShield flue repair | $700 – $1,600 |
| Gas fireplace service call (diagnostic) | $89 – $149 |
In Keller, prices shift mainly with roof pitch, flue height, and how long it’s been since the last service. A chimney that hasn’t been opened in 10 years takes longer to clean, and a steep roof on a two-story Keller home often needs different safety gear. Every price is written and agreed to before work starts, with no surprises at the door.
Neighborhoods We Serve in Keller
We cover the entire Keller area, from the older 1970s and 1980s sections closer to Keller Parkway to the newer subdivisions further out. Typically, we can schedule Keller visits within a few business days, and we’ll give you a specific arrival window, not an all-day guess. Common neighborhoods we work in include:
- Hidden Lakes
- Marshall Ridge
- Willis Ranch
- Northbrook
- Keller Town Center area
Service Area – Cities Near Keller
Hadley Chimney Fort Worth serves the full northeast Tarrant County area. Along with Keller, we regularly work in Haltom City, TX, Colleyville, TX, Fort Worth, TX, and Mansfield, TX. If you’re on the edge of Keller or not sure which area you fall into, call us and we’ll confirm coverage in about two minutes.
Serving Keller, TX - Our Local Coverage Area
We’re based in the Keller area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Keller
Most Keller appointments are scheduled within a few business days, and we give a tracked arrival window so you’re not waiting around all afternoon. If you need a quicker visit for something like water coming through the ceiling, call (682) 900-6393 and we’ll tell you the earliest reality, not a vague promise.
Most Keller HOAs don’t require pre-approval for chimney sweeps or repairs, since the work is on the roof or inside the home and doesn’t change exterior appearance. But if you’re replacing a visible cap or chase cover, a quick check with your HOA board is worth a two-minute phone call. We’re happy to provide a photo or spec sheet if needed.
In Keller’s humidity and temperature swings, skipping a sweep means creosote builds up and holds moisture against the metal flue, which accelerates rust. On prefab systems, that rust can create pinholes that let heat and gases into the attic chase. A sweep costs a lot less than a liner replacement, so it’s genuinely the smart maintenance call for this area.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Keller Customers Say
"Drop cloths down, no soot anywhere. Booking was the easiest part."
- Susan B."Nice job on the gas fireplace. I had to reschedule once, but rebooking took seconds."
- Alice N."Fast, clean, and polite. Sweep took about an hour and the fireplace pulls well again."
- Helen Q.